All products
Green Banquette (a line by EASEN Commercial Furniture) makes restaurant booths and banquettes designed to be re-covered, repaired and reconfigured: removable cushions and covers, replaceable wear edges, bolted or pinned frames, and a choice of wool, recycled-content and plant-based coverings. Everything is made to order in our own production base in Foshan, China, from approved drawings, and shipped factory-direct.
Repair-Ready Booths
Booths whose cushions, covers, wear edges and panels can be removed and replaced individually, so one damaged part does not end the life of the whole piece.
Zip-Cover Booth
A booth with loose back and seat cushions whose covers unzip for cleaning or replacement, fixed to the frame with press studs.
Three-Cushion Service Booth
A booth with three independent back pads and three seat pads, each removable by hand, so one damaged cushion is swapped without closing the table.
Replaceable Wear-Edge Booth
A booth with a clip-off leather strip along the seat front and removable end guard plates: the two places booths wear first.
Pin-and-Peg Booth
A booth assembled entirely with mechanical fixings: bolted back, hooked-on cushions, pinned timber joints and zip-off covers. No glue in the assembly.
Cane Panel Back Booth
A walnut-framed booth with a woven cane back panel that screws in and out, plus an oatmeal lumbar cushion.
Cane Inset End
A booth end cap with a woven cane panel set into an L-shaped walnut frame, screw-fixed so a kicked panel is replaced, not the whole booth.
Rail-and-Cushion Booth
A walnut-backed booth with a brass rail from which three back cushions hang on leather straps, each removable for cleaning or a colour change.
Wool, Recycled and Plant-Based Coverings
The same robust booth construction offered with wool, recycled-content, plant-based and cork finishes, each described honestly with its strengths and limits.
Pure Wool Booth
A booth upholstered in a thick pure-wool cloth with natural undyed fleck, offered for projects that want to avoid coated synthetic coverings.
Recycled-Content Polyester Booth
A booth upholstered in a dense contract weave made with recycled polyester yarn, with the recycled share stated from the mill's data sheet.
Recycled Denim Booth
A booth in deep indigo twill woven with recovered denim fibre, with mustard piping and the natural tonal variation of recycled yarn.
Cork Panel Booth
A booth with a natural cork panel set into the upper back in a slim oak frame, above an upholstered lower back.
Latex and Coir Cushion Booth
A booth whose seat is filled with coconut coir and natural latex topped with wool wadding instead of polyurethane foam, shown in cut-away.
Plant-Based Leather Booth
A booth covered in a cactus-based leather alternative with a fine matte grain, for animal-free projects that want a leather look.
Solid Timber & Natural Frames
Booths and chairs where solid ash, oak, bamboo or reclaimed boards form the visible structure, with exposed joinery that can be re-oiled, repaired and re-glued.
Ash Joinery Booth
A Nordic-style booth with solid ash side frames, exposed through-tenons, a timber back rail and thick wool-blend cushions, with no metal hardware visible.
Engineered Bamboo Booth
A booth with side and back panels and square legs in engineered bamboo, showing the pressed-strip grain and node marks, under a matte clear finish.
Reclaimed Board Booth
A warehouse-style booth clad in reclaimed timber boards with old nail holes and paint traces, with banded leather upholstery and black iron fixings.
Timber Slat Back Booth
A booth with an upper back of vertical solid timber slats you can see through, and an upholstered lumbar pad below.
Oak Cane Dining Chair
A solid oak dining chair with a woven cane back and an upholstered seat pad that can be replaced on its own.
Modular & Bolt-Together Frames
Booth systems in steel, aluminium and timber that bolt together, flat-pack for shipping, share parts across sizes and can be reconfigured when the room changes.
Bolt-Together Steel Booth
A black steel booth frame with no welds: every joint is a visible brass node cover with hex bolts, assembled by two people with a hex key.
Aluminium Frame Booth
A lightweight booth on a bead-blasted aluminium tube frame with brass corner plates and clip-on cushions; recycled-content aluminium available where documented.
One Frame, Three Backs System
A booth system with one common seat box and three interchangeable back heights (85, 110 and 135 cm), joined by bolts behind brass caps.
Flat-Pack Booth
A booth whose back detaches from the seat box on aluminium rails and bolts, roughly halving packed height for shipping.
Aligned-Joint Booth Run
A sectional booth system with brass locating pins, alignment plates and mitred capping so long runs assemble, and re-assemble, without steps or gaps.